Type2 Portable EV Charger

Type2 Electric Vehicle Portable Charger ( IEC 62196-2 Standard ) with Schuko Plug, UK 3 Pin Plug, CEE Plug, AU Plug Meet IEC 62196-2 (Mennekes, Type 2) EU European standard Nice shape and easy to use, protection class IP66 (in mated conditions) Apply to Vehicle Audi A3 e-Tron, BMW i3, BMW i8,...

Product Details

Type2 Electric Vehicle Portable Charger ( IEC 62196-2 Standard ) with Schuko Plug, UK 3 Pin Plug, CEE Plug, AU Plug


PCD详情


Meet IEC 62196-2 (Mennekes, Type 2) EU European standard

Nice shape and easy to use, protection class IP66 (in mated conditions)


Apply to Vehicle

Audi A3 e-Tron, BMW i3, BMW i8, Chevrolet Spark, Mercedes B Class E-Celi, Mercedes S500 PHEV, Mercedes SLS EV, Mercedes Vito E-Cell Van, Porsche Panamera S PHEV, Volkswagen e-Up,Volkswagen e-Golf, Volvo V60 PHEV...


Item: PCD-030 (IEC 62196-2)

IEC 62196-2 Standard (Mostly used in Europe);

Current: 10A;13A;10/16A adjustable;32A;40A

Voltage Range: 220V ± 10%;

Maximum power: 2.2-8.8KW

Auto charge recovery: Yes;

Over current protection: Yes; 
50, 000 Mating Cycles; 
Cable Strain Relief Feature Insulated Terminal Design; 
Lights-indicates charging status; 
IP66; 
Operating Temperatures: -30° To +50° ; 
Cord Length: 20Feet
Warranty: 1 Years; 
Smooth line design;


Type2 通用副图.jpg




Parts can be customized

Box: can print logos on it

Plug: can print logos and choose colors

Cable: can print words or logos and choose colors



3.1.jpg




How to use

A. How to start charging

  1. Firmly insert the power plug into the outlet on the wall. Ensure the outlet with a rated current 

  2. Insert the Type 1/2 plug into the inlet on the vehicle

  3.The device starts charging automatically after the green charging LED begins to keep blinking

1.JPG

B. How to stop charging

1. Disconnect the power plug from the outlet

2. Disconnect the Type 1/2 plug from the vehicle inlet

3. Put the charger away

2.JPG


C. How to switch the current

1.Press the button to switch the current between 10A and 16A before inserting the charging plug (car side)

2.2.JPG


D. LED Charging Status


2.3.JPG




NOTICE FOR USE:

When the car is in low battery, the charger will charge normally with 16AMP.However, when the charge amount is getting higher and higher, the charger and the car would indicate that the charging current will become lower and lower; it is the common phenomenon that has nothing to do with malfunction. The major cause is that the electromotor inside the car recognizes that the battery is nearly full, and needs to gradually reduce the charging current to protect the car battery. This process requires the car to communicate with the charger. Our product is a smart charger that responds to the car's low charging demand and follows the requirements for battery of the car to provide safety and control of the vehicle during the charging process. Please be assured use.




Inquiry