16/32A Single/Three Phase EV Home Charger with Type1/2 Plug Supporting Wifi APP Electric Car EV Charging Station with LCD Display for Home or Commercial Using Fix the Wallbox on the Pole Charging Status Detailed Images Comprehensive protection system We designed all kinds of protective measures...
16/32A Single/Three Phase EV Home Charger with Type1/2 Plug Supporting Wifi APP
Electric Car EV Charging Station with LCD Display for Home or Commercial Using
|Mode||C (with type1/type2 plug)|
|Current||16A/32A single phase/three phase|
|Rated supply voltage||220VAC ± 10%|
|Rated operating frequency||50Hz/60Hz|
|RCD||Type A / Type B|
▅ Make sure the wallbox is connected with the power already ;
▅ Connect the EV and the wallbox well with the EV charging cable ;
▅ Press the button on the right side of the wallbox to start / stop the charging
▅ Place the cable on the hook when not in use
Note: Some other Modes contain RFID card or Key to start / stop instead of Button
Caution of Using
◆ Failure to follow instructions may result in danger;
◆ Please use the charging stand only if it is in accordance with the normal operation of the technology and safe operation;
◆ Children are prohibited from touching charging station;
◆ Install a charging station away from pyrotechnics, dust and corrosive occasions;
◆ The output of the charging station is high pressure, and you must pay attention to personal safety when using it;
◆ If the charging station fails, there is a danger of electric shock and even death. Under emergency situations, you can cut off the power supply;
◆ Do not disassemble the charging station during the use.
In order to ensure the normal service life of the charging station and reduce the use risk, maintenance must be performed within the specified time; the maintenance of the equipment needs to be completed by professionals, and the use of qualified and safe maintenance tools.
The product is already packed in the factory, and during transportation, strong impact and bumps should be avoided to avoid damage to the outer packaging of the product. The product should be placed at an ambient temperature of -40°C~+80°C and a relative humidity of no more than 95%. The ambient air should not contain acids, alkalis or other corrosive gases and explosive gases, and it should be protected from rain, snow, wind and sand.